SELF DRILLING M6-24X18MM FRAMING SCREW

CODE: SDM62418C3

icon-product-application

APPLICATION

Suitable for use in the assembly of:

  • Steel Wall Frames
  • Steel Roof Trusses
  • Steel Floor Trusses
  • This product does not require pre-punched holes

ADAPTER TO USE

#3 Phillips Driver Bit

adapter drawing for the needle point framing screw
icon-product-benefits

FEATURES AND BENEFITS

  • Underhead serrations – serration lock underhead will provide resistance to loosening
  • M6 thread – high shear and torsional strength values
  • SD Point – Will drill without the requirements of pre-punched holes
  • P3 drive – extra control with large driver bit ensures solid connection between steel
icon-product-install

INSTALLATION INSTRUCTIONS

  • Use a #3 Phillips Driver Bit
  • Use mains or cordless screw driver with a speed up to 2,500rpm
    Fit the #3 Phillips Driver Bit into the screw and place it in the fastening position
  • Apply consistent firm pressure on the screwdriver until the screw has fastened. DO NOT OVERTIGHTEN.
  • Strip Torque – 7.44 Nm into 2 x 0.75mm pieces of Truecore steel

Appropriate screw gun/drill with torque control and depth gauge adjustment should be used.

icon-product-mechanical

FASTENER PROPERTIES

Pull Out Values (Steel)

DOWNLOADS

FAQs

  • Steel Wall Frames
  • Steel Roof Trusses
  • Steel Floor Trusses

SHARE

Facebook
LinkedIn
Email