SELF DRILLING HEX M6-11X50MM ROOFING SCREW

CODE: SDHM61150C4N

Suitable for use in the assembly of:

Crest fixing roof sheets to either light gauge steel top hats or timber battens.
Can also be used in steel purlins up to 1.9mm in thickness
Class 4 Fasteners are suitable in Category 3 and 4 environments as described in ISO 9223-2012.
Class 5 available on request.

Hex Socket 5/16″

5/16 hex drive – easy to drive in the screw, and the most common head size used for Roofing and Cladding applications
Zip fast drill point – allows for the screws to be driven effectively into light-gauge steel materials up to 1.9mm and timber battens, whilst maintaining a high pull-out resistance
Coated and painted in Australia to meet AS3566 requirements.
All Colorbond colours available.
Water tight seal – screws are sealed with a genuine DEKS® washer

Use a 5/16 Hex Socket Bit
Use a mains or cordless screw driver with a speed of up to 2,500rpm (These are guides – installer tooling and base materials should be assessed)
Fit the socket bit around the screw head and place the screws in the fastening position
Apply consistent firm pressure on the screw driver until the screw has fastened. DO NOT OVERTIGHTEN.

Appropriate screw gun/drill with torque control and depth gauge adjustment should be used.

Material	Heat Treatment	Coating	Torsion	Mechanical Properties
Carbon Steel 1022	To AS3566	Class 4 Galvanised	15.81Nm	Single Shear 9.67kN

0.55 Top Hat Steel Batten	G450 1.5mm Steel
1.46kN	5.57kN

70 x 45 Radiata Pine @ 30mm Embedment	70 x 35 H2 MGP10 Timber @ 30mm
3.12kN	6.33kN