Self Drilling Hex 14-12x42mm Screws Class 3

CODE: SDH141242C3

APPLICATION

Screws can be used in general Metal to Metal applications

ADAPTER TO USE

Hex Socket 5/16″

FEATURES AND BENEFITS

5/16 hex drive – Easy to drive in the screw. Compatible with 10g and 12g Hex Screws avoiding the need to change Driver Bits.
SD Zip Fast Drill Point – Can drill fast and efficiently with no need for a pre-drilled hole into up to 1.9mm of steel
Class 3 Galvanised coating

INSTALLATION INSTRUCTIONS

Use a 5/16 Hex Socket Bit (NS51642)
Use Mains, Air or Cordless Screw Driver with a speed of up to 3000rpm
Fit the 3/8 Hex Socket Bit around the screw head and place screws in the fastening position
Apply consistent firm pressure on the screw until the screw is fastened. DO NOT OVERTIGHTEN.

Appropriate screw gun/drill with torque control and depth gauge adjustment should be used.

FASTENER PROPERTIES

Material	Heat Treatment	Coating	Torsion	Single Shear
Carbon Steel 1022	To AS3566	Class 3 Galvanised	19.54Nm	12.26kN

Pull Out Values (Steel)

0.75mm G550 Grade Steel	1mm G550 Grade Steel	1.2mm G500 Grade Steel
2.4kN	3.74kN	4.34kN

DOWNLOADS

SHARE