NEEDLE POINT TRI-POINT M6-24X14MM FRAMING SCREW - CLASS 3

CODE: TPM62414C3

needle point framing screw in a pile
icon-product-application

APPLICATION

Suitable for use in the assembly of:

  • Steel Wall Frames
  • Steel Roof Trusses
  • Steel Floor Trusses
  • This product requires pre-punched holes

ADAPTER TO USE

#3 Phillips Driver Bit

adapter drawing for the needle point framing screw
icon-product-benefits

FEATURES AND BENEFITS

  • Underhead Serrations – Serration Lock under head will provide resistance to loosening and provide a higher Strip Torque
  • M6 Thread – High Shear and Torsional strength values
  • Needle Point – A fast way to align screw with pre-punched holes
  • P3 Drive – Extra control with a large Driver Bit ensures a solid connection between steel applications
icon-product-install

INSTALLATION INSTRUCTIONS

  • Use a # 3 Phillips Drive Bit (PH3X50SS)
  • Use Mains, Air or Cordless Screw Driver with a speed of 2500 rpm
  • Fit the # 3 Phillips Driver Bit into the screw head and place screws in the fastening position
  • Apply consistent firm pressure on the screw until the screw is fastened. DO NOT OVERTIGHTEN.
Appropriate screw gun/drill with torque control and depth gauge adjustment should be used.
icon-product-mechanical

FASTENER PROPERTIES

MaterialHeat TreatmentCoatingTorsionSingle Shear
Carbon Steel 1022To AS3566Class 3 Galvanised21.48Nm9.26kN
Pull Out Values
0.75mm Truecore0.75mm Truecore Steel X 2 Connected
1.9kN3.82kN
Enduroframe Connection Test
10.24kN / 1.34 = 7.64kN (2 x TPM62414C3 screws, 1 x 0.75mm G550 Plate, 1 x 0.75mm G550 Ribbed C Stud)
13.84kN / 1.34 = 10.33kN (2 x SDM62418C3 screws, 2 x TPM62414C3 screws, 1 x 0.75mm G550 Plate, 1 x 0.75mm G550 Ribbed C Stud)

DOWNLOADS

DOWNLOAD

SHARE

Facebook
LinkedIn
Email